SDI/ASI 270Mbps audio embedder and fiber optic transport
VS501-EO
VS501 transmitter card ~ SDI / ASI E/O, with 2 x AES or 4 x analog audio embedding. Balanced AES connector panel SFP cage. no SFP laser fitted.
- SDI, SDTI and DVB-ASI compatible
- Removes timing and alignment jitter from the SDI signal
- Passes SMPTE-259M 270 Mbps SDI pathological sequence test
- Embeds up to four channels of analog audio or two channels of AES digital audio, or mix of both
- Asynchronous or synchronous 48Khz audio with 2o-bit audio resolution
- Default SDI keep alive signal
- AES audio present, analog audio present, SDI video present, ASI video present, laser fail, DC power, EDH, loss of input and loss of audio LEDs
- Inband network management
- Automatic cable equalization up to 300m for Belden 8281
- Small Formfactor Pluggable (SFP) optics available in 1310, 1550 and any ITU CWDM or DWDM wavelengths
- NEBS Level 3 compliant
- Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet
Specifications
LED indicators
| General | Error detection handling, loss of input, loss of video, SDI input present, loss of audio 1, loss of audio 2. |
Digital video
| Standards | SDI (SMPTE-259M)/SDTI (SMPTE-305M)/DVB-ASI (EN50083-9) |
| Data Rate | 270Mbps |
| # of Outputs | 2 |
| # of Inputs | 1 |
| Connector | BNC |
| Impedance | 75 Ohm |
| Equalization | Up to 300m w/Belden 8281 |
Digital audio
| Standards | AES/EBU (SMPTE-272M) |
| # of Outputs | 2 (VS501-OE) |
| # of Inputs | 2 (VS501-EO) |
| Connector | BNC (unbalanced). 3-pin terminal (balanced) |
Analog audio
| Standards | Exceeds RS250C short haul specs |
| # of Outputs | 4 (VS501-OE) |
| # of Inputs | 4(VS501-EO) |
| Connector | 3-pin terminal |
Optical transmitter
| # of outputs | 1 |
| Fiber Type | Single mode |
| Connector | SC/PC |
| Laser Type | SFP |
| Laser Wavelengths | 1310nm, 1550nm, CWDM, DWDM |
| Output Power Level | -0.5dBm min |
Element management
| General | Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the cards status, alarms and controls. Note: same as the VS312 plus the following: |
| Status | VS501-EO uplink transmitter status (VS501-OE)/model & serial number |
| Alarms | Laser transmitter failure (VS501-EO)/optical low light (VS501-OE)/VS501-EO uplink transmitter alarms (VS501-OE) |
| Controls | Laser transmitter enable/disable (VS501-EO)/electrical/optical receiver input mode (VS501-OE)/ID setting for the VS501 (0-65535) |
Physical and environmental
| General | Resides in a single slot of a VS101 or VS103 Ventura series chassis |
| Power consumption | 7W typical |
| Operating temperature | 0 to 50C chassis ambient |
| Storage temperature | -40C to 85C ambient |
| Relative humidity | 5% to 85% |
| Compliance | NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick |
| Voltage | +3.3V, +5V, +12V, -12V |
