This document describes how to perform firmware upgrades on the GYDA-SC.
The ability of our frame-synchronizer FRS-SDI to handle applications with embedded digital audio
How the measurements of total delays are performed
The formula for calculating bandwidth of a video signal
This document describes some of the factors involved in Data Routers in general, and specifically Ported RS-422 Routing.
Here is an overview of the relationship between channel spacing expressed in GHz (Giga-Hertz)and nm (nanometers) within the current DWDM-band around 1550nm.
The FC/APC-connector is available with two different versions of mechanical alignment keying,one called R-type and the other is called N-type.
The flashlink system is made for use with G.652 fibre. The input fibre of the receivers is of typeG.651, so the system will work for use with multi mode fibre meeting the specifications of G.651together with 1310nm transmitter cards only.
When latency increases, maximum throughput on a single TCP connection can sometimes drop to a fraction of the theoretical bandwidth.
This document describes how to perform firmware upgrades on the GYDA-SC.
The Master Display Panel (CP-MDP) includes a high resolution QVGA display screen where live video can be presented. “Signal presence”, or confirmation of video content, can be presented with a frequency of 7 pics pr. Sec. Typical use for this application is preview before “Take”.
These are the conventions used when reporting received signal strength indicators (RSSI) in GYDA and other applications.
This document describes some recommendations for Sublime Router interconnection, both Ethernet, RS-232, NCB and combinations of these.
Using SNMP is the easiest way to implement alarm notification from GYDA.All alarms will generate SNMP traps according to the web interface configuration of the GYDASystem Controller.
This Setup Guide also include information on how to upgrade firmware on ETH-CON and Control Panels.
